Metal IP40 enclosures
Compare empty, main-switch, SPD and twin-RCD configurations. Included components vary by option.
View options & prices →WCED Enclosures, Fitted Consumer Units & Custom Builds
WCED • Electrical protection & switching
WCED Enclosures, Fitted Consumer Units & Custom Builds
Choose an enclosure for your own assembly, a consumer unit with specified devices already fitted, or use our configurator to select an enclosure and separate components. Compare the location, included protection and usable space before you order.
Find the right product
Open a product to select its exact configuration and see current prices and availability.
IP65 RCBO + surge unit
Explore a fitted consumer unit for installations requiring the specified IP65 enclosure.
View options & prices →
Indoor RCBO + surge unit
Compare the listed 32A and 40A configurations for a compact indoor assembly.
View options & prices →
IP65 metal consumer unit
Review the metal enclosure option and the devices included in each configuration.
View options & prices →Before you choose
1
Choose the mounting environment
Compare indoor and IP65 ranges against the actual location. Cable entries, mounting and sealing must preserve the assembly's required protection.
2
Check what is already fitted
A main switch, SPD or RCD uses space inside the enclosure. Read the configuration rather than assuming all modules are spare.
3
Plan the remaining circuits
Allow space for the chosen components and practical installation needs. Use the builder's spare-space display as a planning aid, then confirm compatibility.
Planning an enclosure and components?
Our consumer-unit builder lets you choose single-phase or three-phase, select an enclosure and track the spare DIN space as you add supported components. Custom selections are supplied separately; factory-configured units have their own stated contents.
Build your own consumer unit →Frequently asked questions
Are configurator builds supplied fully assembled?
Custom selections are supplied as the enclosure and separate components. Factory-configured products are a separate option and include only the devices stated for that configuration.
Is the number of modules the same as spare ways?
Not necessarily. Factory-fitted devices can occupy modules. Use the stated available capacity and dimensions rather than the enclosure's headline size alone.
Can I put any DIN rail component into a consumer unit?
Physical fit alone does not establish compatibility. Check the assembly manufacturer's requirements, busbar and terminal arrangements, device ratings and thermal limits.
Can I choose single-phase or three-phase?
Yes. The configurator starts with a phase selection. You can also browse the dedicated single-phase and three-phase collections.
From our knowledge base
Get more detail before choosing a configuration.
Explore related WCED ranges
Product selection guidance from EcoHarmony. Check the exact product datasheet and manufacturer instructions for the chosen configuration.
Explore Our Guides
A different set of guides each time you visit — covering troubleshooting, buying advice, technical explainers, and more.
