Product details & specifications
What this product does
A manual changeover switch lets an operator select between two supply paths for a load. A typical application is a designed mains-and-generator installation where the load must be connected to the appropriate source.
When to use it
Use it when manual source selection is required. The complete design must address supply separation, neutral switching, earthing and the protective devices for both sources.
What is included
- The selected changeover switch, supplied bare or in the enclosure explicitly named in the option.
- Generator, automatic controls and circuit protection are not included.
Choosing your options
Choose current rating, pole arrangement and enclosure configuration. The 20A–63A range is listed as three-pole IP66. The 125A choices are switch-only, mini-enclosure or metal-enclosure versions; do not transfer the smaller range’s enclosure rating to them.
What it does not replace
This is manual switching, not an automatic transfer system. It does not synchronise or parallel supplies and is not a substitute for overcurrent or residual-current protection.
Specifications and dimensions
Use the selected configuration above for its part code and current price. Match the exact device and enclosure to the manufacturer’s technical information, allowing cable-entry and wiring clearance as well as the product dimensions.
Manufacturer range and technical information
Common questions
Will it start a generator automatically?
No. A manual changeover switch needs an operator. Automatic starting and transfer require equipment designed for those functions.
Does three-pole mean it also switches neutral?
No. Pole count alone must be checked against the terminal diagram and the required conductor arrangement. Neutral switching is part of the installation design.
Delivery and help choosing
WCED standard delivery is £10, normally 1–2 working days. Express delivery is £20, normally next working day. WCED products are excluded from free delivery.
Ask us to help identify the right part — send the part code or equipment model and the specification you need.