EPC's currently have a longer than usual lead time. 

Viridian EV's EVSE Protocol Controller (EPC) is the intelligent part of the vCharge charging stations. It is the communication unit that enables Mode 3 charging in accordance with IEC 61851 and it is available to buy to those building their own EVSE (Electric Vehicle Supply Equipment) or upgrading/replacing parts in other charging stations.

The EPCs leave the factory programmed ready for use/installation at the amp rating selected at purchase. This is the maximum current advertised by the EPC. If you require a 16A EPC, please purchase a 32A EPC and request a resistor in the notes section available when ordering. This can be wired into the IC -0V terminals and reduce the maximum advertised current from 32A to 16A. 

On top the different current ratings available, there are two different flavours:

• Tethered (Compatible with tethered installations only)
• Free/Socket (Compatible with Type 2 free/socket installations only)

For further support on selecting and configuring the EPC check out this guide and download the manual.

Click here for a helpful YouTube video

O en Español aquí o aquí

Key details:

• 35mm DIN rail mount
• Dimensions:
• Height: 90mm
• Width: 36mm (2 modules)
• Depth: 57mm
• The front face is 53mm from the face of the DIN rail
• The LED status indicator protrudes 2mm from the front face.

These are the same product that used to be available from Mainpine.