ecoHarmony

My Account

Viridian EV Solar Charge Controller (SCC)

Viridian EV

£95.00
£114.00 Inc. VAT

Viridian EV Solar Charge Controller (SCC)
Viridian EV Solar Charge Controller (SCC) Viridian EV Solar Charge Controller (SCC) Viridian EV Solar Charge Controller (SCC)

Viridian EV

£95.00
£114.00 Inc. VAT

has been successfully added to your cart . Feel free to continue shopping or check out .

***PRE-ORDER***  - This listing is for pre-orders of the SCC coming out in 2018

Viridian EV's Solar Charge Controller (SCC) enables proportional EV charging for properties equipped with PV Solar Panels. The SCC can be configured to scale the output to the capacity of your PV system.

The SCC is designed for use in any charging station featuring a Viridian EV or Mainpine EPC.  It is mains powered and is designed to be located within the charge point enclosure. 

The SCC can be operated in a choice of 4 program modes, selectable via the integrated push-button on the face of the unit: 

Program 1: Solar Mode - Limit charging to the level currently available from the PV panels. If available current drops below the 6A minimum, vehicle charging will be disabled until sufficient solar energy is available to begin charging the vehicle.
 
Program 2: Fixed Minimum - 6A Current mode. EV will charge at a minimum of 6A, if measured solar capacity exceeds 6A charging current will increase however charging will never be disabled entirely.
 
Program 3: Fixed minimum - 10A Current mode. EV will charge at a minimum of 10A, if measured solar capacity exceeds 10A charging current will increase however charging will never be disabled entirely.
 
Program 4: Override mode - Enables full capacity charging at the maximum rate the EVSE or EV can support.

Program modes 2 and 3 allow for more efficient use of the available solar energy without the worry that your EV will be left with no charge if the weather takes a turn for the worse. The 10A programme was selected based on the calculated charge time to suggest a vehicle would be fully charged overnight. 10a represents roughly 2.4kw per hour charging rate.
 
Shipped as standard with 10 Metres of cable to solar sensor however alternate lengths of cable can be supplied - contact us for more details.
SCC Base Unit supplied as DIN-Rail mounted module for easy integration into existing systems.
 
The SCC is fully compatible with Viridian EV & Zero Carbon World charge points.
 
Specifications:
  • Power Supply: 100-240V AC 50/60Hz
  • Dimensions (L W D):
    • SCC Base Unit: 98mm x 23mm x 57.5mm
    • SCC Solar Sensor: 40mm x 40mm x 22mm
  • Supplied as standard with 10M of cable between Base Unit and Solar Sensor
  • Fits onto 35mm DIN Rail
  • Designed for PV systems with capacity ranging from 0-10KWH