EVSE Protocol Controller 2.0 (EPC 2.0) | ecoHarmony


My Account

EVSE Protocol Controller 2.0 (EPC 2.0)

Viridian EV

£124.80 Inc. VAT

EVSE Protocol Controller 2.0 (EPC2.0) and CT Clamp

Viridian EV

£124.80 Inc. VAT

has been successfully added to your cart . Feel free to continue shopping or check out .

The Viridian EV EPC 2.0 builds on the success of the 1st generation of EVSE controller (EPC). It is the same size DIN rail mounted module designed for IEC 61851 compliant EV charge points, but with more features and configurable options.

The 35mm wide module can support 1 charging outlet, either a socket outlet or a tethered cable, as well as added electrical safety features that help charge point manufacturers and installers meet regulations in a cost-effective way. Like before, It has an internal status indicator LED and support for an external LED.

Additional Safety Features

DC Sensor / RCM Support (Western Automation RCM14-01 kit supplied as optional extra*) - The EPC 2.0 has support for DC leakage protection and will detect DC currents of 6mA or greater, disabling the charging session and making the equipment safe,

PEN Loss Detection system - The  EPC 2.0 has the ability to protect the user in the event of a failure/loss of the PEN conductor in the distribution network The EPC 2.0 will disconnect all live conductors and the protective earth conductor, making the equipment safe until the fault is fixed.

Configurable options

The EPC 2.0 comes as a single stock option, with configurable features listed below selected on a 10 way DIP switch accessed under the lid/front face of the device.
  • Configurable for Tethered or Socket outlets
  • Configurable for 16A or 32A max sysem operating currents
  • Configurable for solenoid or motor locking systems
  • Configurable for lock feedback or no lock feedback
  • Configurable lock engaged polarity for different motor locking systems
  • Configurable for RCM or No RCM
  • Configurable charging current in 1A increments between 6A and system maximum (either 16A or 32A)
Summary of key features
  • Mains input (207—257V @ 50 Hz AC)
  • 2 x Relay contacts (230V AC ) for switching the load/EV and Aux/Earth contactors
  • Solenoid or motor interlock drive for socket locking mechanisms
  • 1 x Current Transformer supplied for PEN Loss detection
  • 35mm DIN rail mount
  • Dimensions:
    • Height: 90mm
    • Width: 36mm (2 modules)
    • Depth (when mounted on a DIN rail): 57mm
  • The LED status indicator protrudes 2mm from the front face.
  • Operating current configuration - voltage, resistor, switch or variable resistor
  • External status indicator LED support

*Optional DC Sensor kit

If selected above, this optional extra will include a Western Automation RCM14-01 and a wiring harness (with suitable connector) ready for assembly

See datasheet and manual for more technical information and usage

Safe use
Suitably rated electrical protection in accordance with local regulations must also be used to provide the correct level of protection whilst avoiding unnecessary tripping.
Users of this product assume responsibility for the correct design and installation of their EVSE. Consult the datasheet, manual or an electrical contractor if needed. Neither ecoHarmony or Viridian EV will be held liable for injury to living creatures nor damage to property arising from incorrect use of this product.