Viridian EV EVSE Protocol Controller Free/Socket
£91.20 Inc. VAT
£91.20 Inc. VAT
Viridian EV's EVSE Protocol Controller (EPC) is the intelligent part of the vCharge charging stations. It is the communication unit that enables Mode 3 charging in accordance with IEC 61851 and it is available to buy to those building their own EVSE (Electric Vehicle Supply Equipment) or upgrading/replacing parts in other charging stations.
The EPCs leave the factory programmed ready for use/installation at the current rating selected at purchase. This is the maximum current advertised by the EPC.
There are two main types:
- Tethered (Compatible with tethered installations only)
- Free/Socket (Compatible with Type 2 free/socket installations only)
Socket outlets, like those we sell, have mechanisms to lock the inserted cable during charging and we can supply EPCs for two different types
Solenoid Locking System
Suitable for this socket, the EPC drives a solenoid with a simple 12V constant signal and the pin/lock releases on power off
Motorised Locking System
Suitable for this socket, the EPC uses motor-lock, motor-unlock signals to drive the lock & feedback implementation to ensure lock position. Note; the feedback has been designed for a 4 wire lock that is used in some of our charge points.
- 35mm DIN rail mount
- Height: 90mm
- Width: 36mm (2 modules)
- Depth: 57mm
- The front face is 53mm from the face of the DIN rail
- The LED status indicator protrudes 2mm from the front face.
These are the same product that used to be available from Mainpine.Safe use
A suitably rated RCBO device must also be used to provide the correct level of protection whilst avoiding unnecessary tripping.
Users of this product assume responsibility for the correct design and installation of their EVSE. Consult the Viridian EV website or an electrical contractor if needed. Neither ecoHarmony or Viridian EV will be held liable for injury to living creatures nor damage to property arising from incorrect use of this product.